Design Store

First Nios ii Design Example for MAX 10 NEEK Board  

CategoryTutorial
NameFirst Nios ii Design Example for MAX 10 NEEK Board
DescriptionIn this design example you will learn how to create a Nios II project on MAX 10 NEEK with Qsys and Nios II Eclipse Software. You will understand the SOPC system on FPGA with MAX 10 NEEK board After learning the project
Operating SystemNone
IP Core
IP CoreHeading
Nios II Gen2 ProcessorNios
IRQ MapperInterrupt
JTAG UARTSerial
MM InterconnectMerlin Components
Avalon-ST AdapterStreaming
Avalon-ST Error AdapterStreaming
Memory-Mapped DemultiplexerMemory-Mapped
Memory-Mapped MultiplexerMemory-Mapped
Avalon-MM Master AgentMemory-Mapped
Memory-Mapped Traffic LimiterMemory-Mapped
Avalon-MM Master TranslatorMemory-Mapped
Avalon-MM Slave AgentMemory-Mapped
Avalon-ST Single Clock FIFOOn Chip Memory
Avalon-MM Slave TranslatorMemory-Mapped
Memory-Mapped RouterMemory-Mapped
Altera On-Chip FlashOn Chip Memory
On-Chip Memory (RAM or ROM)On Chip Memory
PIO (Parallel I/O)Peripherals
Reset ControllerClocks; PLLs and Resets
Version1.0
FamilyMAX 10
Device10M50DA
Documentation
DocumentDescription
Max10Neek_My_First_NiosIIThis tutorial provides comprehensive information which will help users understand how to create a FPGA based QSYS system and implement it on MAX10 NEEK board and run software upon it.
Development KitMAX 10 NEEK
Installation Package Download

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:


Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/my_first_niosii.par

Once the process completes, then type:

quartus_sh --platform –name my_first_niosii

Total Downloads16 (From 17 May 2016 to 13 Mar 2017)
Quartus II Version Download Quartus II v16.0
VendorTerasic


Last updated on May 17, 2016, 12:52 p.m.