|Name||Drive on Chip Multi Axis Motor Control (FalconEye) (AN773)|
|Description||Drive on chip reference design for MAX10 development kit and DevBoards FalconEye 2 HSMC power board. Note that this design uses DDR3 memory and the pinout on the devkit changes based on the revision of your kit. See the MAX 10 dev kit baseline pinout design for a TCL script with the pinout changes between the different revisions of the development kits. The default setup requires a Rev C dev kit.|
|Development Kit||MAX 10 FPGA Development Kit|
|Installation Package|| Download|
Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.
Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.
Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.
At the command-line, type the following command:
Once the process completes, then type:
|Total Downloads||16 (From 26 Jan 2017 to 27 Apr 2017)|
|Quartus II Version||Download Quartus II v16.0|
Last updated on Jan. 26, 2017, 11:24 a.m.