|Name||Become an FPGA Designer in 4 hour lab solution|
|Description||This training gives basic skills to design with Altera FPGAs. The course uses lecture, demonstrations & labs that is completed in 4 hours. You will learn about the architectural features of Altera devices, as well as how the Altera Quartus II design software works. The 6 labs will train you to:|
1) Set up a design project, 2) Set assignments and compile a design, 3) Perform Timing Analysis, 4) Perform Power Analysis, 5) Download your design to hardware, 6) Debug your design with the SignalTap II Logic Analyzer
The course is most beneficial when using the BeMicro MAX10 Evaluation kit from our partner Arrow. If you choose not to purchase the kit, you can complete all labs except Design Download & Debug.
|Development Kit||BeMicro MAX 10 FPGA Evaluation Kit|
|Installation Package|| Download|
Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.
Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.
Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.
At the command-line, type the following command:
Once the process completes, then type:
|Total Downloads||105 (From 14 Jun 2016 to 27 Apr 2017)|
|Quartus II Version||Download Quartus II v16.0|
Last updated on June 14, 2016, 9:17 a.m.