Design Store

ADC_MIC_LCD  

CategoryDesign Example
NameADC_MIC_LCD
DescriptionThere is a high-sensitive microphone on the NEEK 10 board to receive the surrounding sound. After the sound is collected and amplified approximately 392 times.It is feed into the ADC of MAX 10 device. The digitized waveform will be displayed on the LCD. Meanwhile the signal will be sent to the Line-out via audio codec and DAC SMA OUT connector. Both of which can be connected to an external speaker. The data will also be processed based on the volume to be displayed on the 10 LEDs onboard.
Operating SystemNone
IP Core
IP CoreHeading
Avalon ALTPLLPLL
Altera Modular ADC corePeripherals
Altera Modular ADC Control corePeripherals
Reset ControllerClocks; PLLs and Resets
Version1.0
FamilyMAX 10
Device10M50DA
Development KitMAX 10 NEEK
Installation Package Download

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:


Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/adc_mic_lcd.par

Once the process completes, then type:

quartus_sh --platform –name adc_mic_lcd

Total Downloads39 (From 14 Feb 2016 to 13 Mar 2017)
Quartus II Version Download Quartus II v16.0
VendorTerasic


Image 2


Last updated on April 13, 2016, 1:21 a.m.