Design Store

SPI Slave to Avalon Master Bridge for MAX10 Dev Kit  

CategoryDesign Example
NameSPI Slave to Avalon Master Bridge for MAX10 Dev Kit
DescriptionThis design example shows how to use the SPI Slave to Avalon Master Bridge which provide connection between host system and remote system for SPI transaction on MAX10 Development Kit
Operating SystemNone
IP Core
IP CoreHeading
Avalon ALTPLLPLL
Nios II Gen2 ProcessorNios
Interval TimerPeripherals
IRQ MapperInterrupt
JTAG UARTSerial
MM InterconnectMerlin Components
Avalon-ST AdapterStreaming
Avalon-ST Error AdapterStreaming
Memory-Mapped DemultiplexerMemory-Mapped
Memory-Mapped MultiplexerMemory-Mapped
Avalon-MM Master AgentMemory-Mapped
Memory-Mapped Traffic LimiterMemory-Mapped
Avalon-MM Master TranslatorMemory-Mapped
Avalon-MM Slave AgentMemory-Mapped
Avalon-ST Single Clock FIFOOn Chip Memory
Avalon-MM Slave TranslatorMemory-Mapped
Memory-Mapped RouterMemory-Mapped
On-Chip Memory (RAM or ROM)On Chip Memory
Reset ControllerClocks; PLLs and Resets
SPI (3 Wire Serial)Serial
System ID PeripheralDebug and Performance
SPI Slave to Avalon Master BridgeMemory Mapped
Version1.0
FamilyMAX 10
Device10M50DA
Documentation
DocumentDescription
Original SPI Slave to Avalon Master BridgeLink to the original design example targeting Cyclone CVSX
Development KitMAX 10 FPGA Development Kit
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:


Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/top.par

Once the process completes, then type:

quartus_sh --platform –name top

Download
Total Downloads60 (From 19 Oct 2016 to 04 Oct 2017)
Quartus II VersionDownload Quartus II v16.0
Quartus II EditionStandard
VendorAltera


Last updated on Oct. 19, 2016, 9:22 p.m.