Design Store

Reset Factory Settings LED Flash - BeMicro  

CategoryDesign Example
NameReset Factory Settings LED Flash - BeMicro
DescriptionWhen generating design .pof files to download into MAX 10 Flash configuration memory, the factory setting design which blinks the LEDs is overwritten.

This design example contains the factory setting .pof file and Verilog source files to restore the out of box settings.
Operating SystemNone
IP Core
IP CoreHeading
Version0.9
FamilyMAX 10
Device10M08DA
Documentation
DocumentDescription
Documentation -
Development KitBeMicro MAX 10 FPGA Evaluation Kit
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:


Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/BeMicro_LED.par

Once the process completes, then type:

quartus_sh --platform –name BeMicro_LED

Download
Total Downloads46 (From 07 Jun 2016 to 04 Oct 2017)
Quartus II VersionDownload Quartus II v16.0
Quartus II EditionStandard
VendorArrow


Last updated on April 7, 2017, 4:05 p.m.