|Name||Nios II Simple Socket Server Ethernet Example|
|Description||This design example demonstrates communication with a telnet client on a development host PC. The telnet client offers a convenient way of issuing|
commands over a TCP/IP socket to the Ethernet-connected NicheStack TCP/IP Stackrunning on the Altera development board with a simple TCP/IP socket server example. The socket server example receives commands sent over a TCP/IP connection and turns LEDs on and off according to the commands. Note that this design uses DDR3 memory and the pinout on the devkit changes based on the revision of your kit. See the MAX 10 dev kit baseline pinout design for a TCL script with the pinout changes between the different revisions of the development kits.
|Development Kit||MAX 10 FPGA Development Kit|
|Installation Package|| Download|
Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.
Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.
Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.
At the command-line, type the following command:
Once the process completes, then type:
|Total Downloads||151 (From 14 Jun 2016 to 24 Jul 2017)|
|Quartus II Version||Download Quartus II v16.0|
|Quartus II Edition||Standard|
Last updated on June 14, 2016, 2:25 p.m.