Design Store

Nios II ADC /LCD Controller Design Example  

CategoryDesign Example
NameNios II ADC /LCD Controller Design Example
DescriptionDemonstrates how to connect and use the Analog to Digital Converter Feature and display results on an LCD Controller using the MAX 10 Evaluation Kit. Note that you need a SainSmart LCD Controller Arduino Shield in addition to your MAX 10 Evaluation Kit.
Operating SystemBareMetal
IP Core
IP CoreHeading
Avalon ALTPLLPLL
Avalon-ST AdapterStreaming
Avalon-ST Channel AdapterStreaming
Avalon ST Debug FabricDebug & Performance
Avalon-ST DemultiplexerStreaming
Altera Management Reset BlockDebug and Performance
Avalon-ST Timing AdapterStreaming
Avalon-ST MultiplexerStreaming
Trace FabricDebug & Performance
Avalon-ST Data Format AdapterStreaming
Avalon-MM Pipeline BridgeMemory Mapped
altera_trace_capture_controllerTrace
Avalon-ST Pipeline StageStreaming
On-Chip Memory (RAM or ROM)On Chip Memory
MM InterconnectMerlin Components
Avalon-ST Error AdapterStreaming
Avalon-MM Slave AgentMemory-Mapped
Avalon-ST Single Clock FIFOOn Chip Memory
Avalon-MM Slave TranslatorMemory-Mapped
Memory-Mapped DemultiplexerMemory-Mapped
Memory-Mapped MultiplexerMemory-Mapped
Memory-Mapped RouterMemory-Mapped
Avalon-MM Master AgentMemory-Mapped
Memory-Mapped Traffic LimiterMemory-Mapped
Avalon-MM Master TranslatorMemory-Mapped
Trace ROMTrace
Reset ControllerClocks; PLLs and Resets
Timestamp monitorTrace
transacto_liteTrace
Altera Modular ADC corePeripherals
Altera Trace ADC MonitorOther
Altera Trace ADC Monitor CoreOther
Altera Trace ADC Monitor Width AdapterOther
altera_trace_monitor_endpointDebug & Performance
Altera Modular ADC Control corePeripherals
Altera Modular ADC Sample Storage corePeripherals
Altera Modular ADC Sequencer corePeripherals
Avalon-ST SplitterStreaming
IRQ MapperInterrupt
JTAG Debug LinkDebug and Performance
altera_avalon_st_debug_host_endpointDebug & Performance
JTAG Debug Link (internal module)Debug and Performance
Avalon-ST Bytes to Packets ConverterStreaming
Avalon-ST JTAG InterfaceSerial
Avalon-ST Packets to Bytes ConverterStreaming
JTAG UARTSerial
PIO (Parallel I/O)Peripherals
altera_jtag_avalon_masterSystem
Avalon Packets to Transaction ConverterStreaming
Nios II Gen2 ProcessorNios
Nios II Gen2 Processor UnitNios
System ID PeripheralDebug and Performance
altera_trace_controller_endpointDebug & Performance
Version1.0
FamilyMAX 10
Device10M08SA
Documentation
DocumentDescription
ADC/LCD Controller User Guide-
Development KitMAX 10 FPGA 10M08 Evaluation Kit
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:


Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/evalkit_adc_lcd.par

Once the process completes, then type:

quartus_sh --platform –name evalkit_adc_lcd

Download
Total Downloads179 (From 06 Jun 2016 to 04 Oct 2017)
Quartus II VersionDownload Quartus II v16.0
Quartus II EditionStandard
VendorAltera


Last updated on June 6, 2016, 2:22 p.m.