Design Store


CategoryDesign Example
DescriptionWhen the HDMI Receiver receives and decrypts the data, the data can be divided into both audio and video parts where the audio part is played after being encrypted by Audio Codec(TLV320AIC3254_0) and the video will be displayed on the multi-touch LCD panel.
Operating SystemNone
IP Core
IP CoreHeading
Clocked Video Input II (4K Ready)Video and Image Processing
Clocked Video Output II (4K Ready)Video and Image Processing
Video Input BridgeComponent Library
Scaler IIVideo and Image Processing
Scaler Algorithmic CoreComponent Library
Frame Buffer II (4K Ready)Video and Image Processing
DDR3 SDRAM Controller with UniPHYMemory Interfaces with UniPHY
Altera DDR3 Nextgen Memory ControllerMemory Controllers
Altera Nextgen Memory Controller MM-ST AdapterMemory Controller Components
Altera DDR3 Nextgen Memory Controller CoreMemory Controller Components
Altera DDR3 AFI MultiplexerMemory AFI Multiplexers
DDR3 SDRAM External Memory PHYMemory PHYs
DDR3 SDRAM External Memory PLL/DLL/OCT blockMemory PHYs
DDR3 SDRAM Qsys SequencerMemory Sequencers
Avalon-MM Master AgentMemory-Mapped
Avalon-MM Master TranslatorMemory-Mapped
Avalon-MM Slave AgentMemory-Mapped
Avalon-ST Single Clock FIFOOn Chip Memory
Avalon-MM Slave TranslatorMemory-Mapped
MM InterconnectMerlin Components
Avalon-ST AdapterStreaming
Avalon-ST Error AdapterStreaming
Memory-Mapped DemultiplexerMemory-Mapped
Memory-Mapped MultiplexerMemory-Mapped
Memory-Mapped Burst AdapterMemory-Mapped
Memory-Mapped RouterMemory-Mapped
Reset ControllerClocks; PLLs and Resets
FamilyMAX 10
MAX10_NEEK_User_manualPlease refer to section 5.5 of this document for the details of the HDMI RX demonstration. Users can also be aware of the seting up steps of the HDMI RX demonstration.
Development KitMAX 10 NEEK
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:

Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/hdmi_rx_lcd.par

Once the process completes, then type:

quartus_sh --platform –name hdmi_rx_lcd

Total Downloads51 (From 17 May 2016 to 04 Aug 2017)
Quartus II VersionDownload Quartus II v16.0
Quartus II EditionStandard

Last updated on May 17, 2016, 3:35 p.m.