Design Store

gsensor_lightsonsor_lcd  

CategoryDesign Example
Namegsensor_lightsonsor_lcd
DescriptionThis demonstration shows a bubble level implementation based on a digital accelerometer. We use I2C protocol to control the ADXL345 digital accelerometer, and the APDS-9301 Miniature Ambient Light Photo Sensor. The LCD displays the interface of our demo. When tilting the MAX 10 NEEK, the ADXL345 measures the static acceleration of gravity. In our Nios II software, we compute the change of angle in the x-axis and y-axis, and show the angle data on the LCD display. The value of light sensor will change as the brightness changes around the light sensor.
Operating SystemNone
IP Core
IP CoreHeading
PIO (Parallel I/O)Peripherals
IRQ MapperInterrupt
IRQ Clock CrosserInterrupt
JTAG UARTSerial
Avalon-ST Data Format AdapterStreaming
Pixel Converter (BGR0 --> BGR)Peripherals
Avalon FIFO MemoryOn Chip Memory
Scatter-Gather DMA ControllerDMA
Avalon-ST Timing AdapterStreaming
DDR3 SDRAM Controller with UniPHYMemory Interfaces with UniPHY
Altera DDR3 Nextgen Memory ControllerMemory Controllers
Altera Nextgen Memory Controller MM-ST AdapterMemory Controller Components
Altera DDR3 Nextgen Memory Controller CoreMemory Controller Components
Altera DDR3 AFI MultiplexerMemory AFI Multiplexers
DDR3 SDRAM External Memory PHYMemory PHYs
DDR3 SDRAM External Memory PLL/DLL/OCT blockMemory PHYs
DDR3 SDRAM Qsys SequencerMemory Sequencers
Avalon-MM Master AgentMemory-Mapped
Avalon-MM Master TranslatorMemory-Mapped
Avalon-MM Slave AgentMemory-Mapped
Avalon-ST Single Clock FIFOOn Chip Memory
Avalon-MM Slave TranslatorMemory-Mapped
Avalon-MM Clock Crossing BridgeMemory Mapped
MM InterconnectMerlin Components
Avalon-ST AdapterStreaming
Avalon-ST Error AdapterStreaming
Memory-Mapped DemultiplexerMemory-Mapped
Memory-Mapped MultiplexerMemory-Mapped
Avalon-ST Handshake Clock CrosserStreaming
Memory-Mapped Width AdapterMemory-Mapped
Memory-Mapped Burst AdapterMemory-Mapped
Memory-Mapped Traffic LimiterMemory-Mapped
Memory-Mapped RouterMemory-Mapped
Nios II Gen2 ProcessorNios
Avalon ALTPLLPLL
Reset ControllerClocks; PLLs and Resets
System ID PeripheralDebug and Performance
Interval TimerPeripherals
Version1.0
FamilyMAX 10
Device10M50DA
Documentation
DocumentDescription
MAX10_NEEK_User_manualPlease refer to section 6.6 of the document fot details of this demonstration. The setting up steps are also provided in this section.
Development KitMAX 10 NEEK
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:


Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/gsensor_lightsensor_lcd.par

Once the process completes, then type:

quartus_sh --platform –name gsensor_lightsensor_lcd

Download
Total Downloads11 (From 17 May 2016 to 19 Jun 2017)
Quartus II VersionDownload Quartus II v16.0
Quartus II EditionStandard
VendorTerasic


Image 2


Last updated on May 17, 2016, 2:37 p.m.