Design Store

Dual Boot Design Example for Odyssey Development Kit   

CategoryDesign Example
NameDual Boot Design Example for Odyssey Development Kit
DescriptionThe MAX 10 FPGA device allows you to load one of two images from flash memory. This design example demonstrates how to load one of the two images from flash memory using MAX 10 Odyssey Development Kit
Operating SystemNone
IP Core
IP CoreHeading
Altera Dual BootConfiguration
Reset ControllerClocks; PLLs and Resets
FamilyMAX 10
Dual Boot User Guide For Odyssey Development Kit-
Development KitOdyssey MAX 10 FPGA Kit
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:

Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/MAX10_DualBoot_Odyssey.par

Once the process completes, then type:

quartus_sh --platform –name MAX10_DualBoot_Odyssey

Total Downloads20 (From 10 Nov 2015 to 09 Feb 2017)
Quartus II VersionDownload Quartus II v16.0
Quartus II EditionStandard

Last updated on May 17, 2016, 11 a.m.