Design Store

Custom Instruction with Nios II Processor  

CategoryDesign Example
NameCustom Instruction with Nios II Processor
DescriptionThis design example demonstrates the custom instruction for NIOS II Processor.
Operating SystemBareMetal
IP Core
IP CoreHeading
IRQ MapperInterrupt
JTAG UARTSerial
MM InterconnectMerlin Components
Memory-Mapped DemultiplexerMemory-Mapped
Memory-Mapped MultiplexerMemory-Mapped
Avalon-MM Slave AgentMemory-Mapped
Avalon-ST Single Clock FIFOOn Chip Memory
Avalon-MM Slave TranslatorMemory-Mapped
Avalon-MM Master AgentMemory-Mapped
Avalon-MM Master TranslatorMemory-Mapped
Memory-Mapped RouterMemory-Mapped
Nios II Gen2 ProcessorNios
Nios II Gen2 Processor UnitNios
Custom Instruction Slave TranslatorNios II Custom Instructions
Custom Instruction InterconnectNios II Custom Instructions
Custom Instruction Master TranslatorNios II Custom Instructions
On-Chip Memory (RAM or ROM)On Chip Memory
Reset ControllerClocks; PLLs and Resets
Interval TimerPeripherals
Version1.1
FamilyMAX 10
Device10M08SA
Documentation
DocumentDescription
Custom Instruction User GuideCustom Instruction User Guide
Development KitMAX 10 FPGA 10M08 Evaluation Kit
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:


Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/custom_inst_eval.par

Once the process completes, then type:

quartus_sh --platform –name custom_inst_eval

Download
Total Downloads111 (From 18 Jul 2016 to 04 Oct 2017)
Quartus II VersionDownload Quartus II v16.0
Quartus II EditionStandard
VendorAltera


Last updated on July 18, 2016, 11:52 a.m.