Design Store

Custom Instruction and Nios II Processor - MAX10 DE10 Lite  

CategoryDesign Example
NameCustom Instruction and Nios II Processor - MAX10 DE10 Lite
DescriptionThis design example demonstrates the use of custom instruction for the NIOS II processor.
Operating SystemNone
IP Core
IP CoreHeading
IRQ MapperQsysInterconnect
JTAG UARTConfigurationProgramming
MM InterconnectQsysInterconnect
Avalon-ST AdapterQsysInterconnect
Avalon-ST Error AdapterQsysInterconnect
Memory-Mapped DemultiplexerQsysInterconnect
Memory-Mapped MultiplexerQsysInterconnect
Avalon-MM Slave AgentQsysInterconnect
Avalon-ST Single Clock FIFOQsysInterconnect
Avalon-MM Slave TranslatorQsysInterconnect
Avalon-MM Master AgentQsysInterconnect
Avalon-MM Master TranslatorQsysInterconnect
Memory-Mapped RouterQsysInterconnect
Nios II Gen2 ProcessorNiosII
Nios II Gen2 Processor UnitNiosII
Custom Instruction Slave TranslatorQsysInterconnect
Custom Instruction InterconnectQsysInterconnect
Custom Instruction Master TranslatorQsysInterconnect
On-Chip Memory (RAM or ROM)OnChipMemory
Reset ControllerQsysInterconnect
Interval TimerPeripherals
Version1.0
FamilyMAX 10
Device10M50DA
Documentation
DocumentDescription
Custom Nios Instruction Manual Custom Nios Instruction Manual
Development KitMAX 10 DE10 - Lite
Installation Package

Note: After downloading the design example, you must prepare the design template. The file you downloaded is of the form of a <project>.par file which contains a compressed version of your design files (similar to a .qar file) and metadata describing the project. The combination of this information is what constitutes a <project>.par file. In releases 16.0 or newer, you can simply double click on the <project>.par file and Quartus will launch that project.

The second means to bring up the project template is through the New Project Wizard (File -> New Project Wizard). After entering the project name and folder on the first panel, the second panel will ask you to specify an empty project or project template. Select project template. You will see a list of Design Templates projects that you have loaded prior as well as various "Baseline Pinout Designs" that contain the pinout and settings for a variety of development kits. If you don't see your design template in the list, click on the link that states install the Design Templates circled below:


Browse to the <project>.par file you downloaded, click next, followed by Finish, and your design template will be installed and displayed in the Project Navigator pane in Quartus.

Note: When a design is stored in the Design Store as a design template, it has been previously regression tested against the stated version of Quartus software. The regression ensures the design template passes analysis/synthesis/fitting/assembly steps in the Quartus design flow.

At the command-line, type the following command:

quartus_sh --platform_install –package <project directory>/de10_custom_inst.par

Once the process completes, then type:

quartus_sh --platform –name de10_custom_inst

Download
Total Downloads35 (From 19 Oct 2016 to 17 Nov 2017)
Quartus II VersionDownload Quartus II v16.0
Quartus II EditionStandard
VendorAltera


Last updated on Oct. 21, 2016, 3:57 p.m.